TMS-RGB → Build it → Parts

Buy Everything from Digi-Key in One Click



Now just copy the contents of this box and paste it into the "Bulk Add" section of your Digi-Key Shopping Cart:

12,311-1341-1-ND,C-general
1,311-1085-1-ND,C3
1,1276-1804-1-ND,C9
1,311-560KHRCT-ND,R1
4,311-910HRCT-ND,R2/4/7/10
1,311-680HRCT-ND,R3
1,311-160HRCT-ND,R5
1,P620HCT-ND,R6
1,YAG2318CT-ND,R8
1,311-5.60KHRCT-ND,R9
4,311-75.0HRCT-ND,R11/12/13/14 (75-ohm)
4,311-0.0GRCT-ND,R11/12/13/14 (0-ohm)
1,296-12111-1-ND,U1
1,296-47437-1-ND,U2
1,MAX4395EUD+-ND,U3
1,296-17712-1-ND,U4
1,296-13013-1-ND,U5
1,LMH1251MT/NOPB-ND,U6
1,296-41661-1-ND,U7
1,CP-2780-ND,8-pin jack
1,CP-2290-ND,9-pin jack

This will technically add two sets of output resistors (75-ohm and 0-ohm jumpers) to your cart. Depending on the connection you choose, you could save ~$0.30 by removing the parts you're not going to use from your cart. Or leave it as-is, just to be sure.

If any of those product IDs become invalid, please let me know.

Or Pick Your Own Parts

Capacitors: X7R or better with the highest voltage rating your wallet can tolerate. Shoot for 25V or higher.

  • C1, C2, C4, C5, C6, C7, C8, C10, C11, C12, C13, C14: 0603 100nF
  • C3: 0603 10nF
  • C9: 1206 10µF

Resistors: all 0603, 1% or better tolerance.

  • R1: 560K
  • R2, R4, R7, R10: 910R
  • R3: 680R
  • R5: 160R
  • R6: 620R
  • R8: 10K and <100ppm/C° temperature coefficient. If you're going to spend more for better tolerances, this is the part to do it on.
  • R9: 5K6
  • R11, R12, R13, R14: 75R or 0Ω jumpers depending on your connection.

ICs: double-check the package type. A few of these come in other sizes that won't fit on the PCB.

  • U1: CD74HC4053PWR
  • U2: LM1881MX/NOPB
  • U3: MAX4395EUD
  • U4: TS5A4597DCKR
  • U5: SN74LVC2G17DCKR
  • U6: LMH1251MT/NOPB
  • U7: THS7374IPWR